Jenoptik spot speed camera achieves UK gov approval

Jenoptik Traffic Solutions UK has announced its Vector SR camera has achieved UK Home Office type approval to operate as an unattended enforcement device for measurement of vehicle speeds. Jenoptik says the Vector SR camera was developed to measure ‘spot speeds’ over a short section of road, such as those which are prone to collisions. The solution uses the Vector2 integrated automatic number plate recognition (ANPR) camera platform, working alongside Jenoptik’s 3D tracking radar device, and can be m
April 8, 2019 Read time: 1 min

79 Jenoptik Traffic Solutions UK has announced its 8808 Vector SR camera has achieved UK Home Office type approval to operate as an unattended enforcement device for measurement of vehicle speeds.

Jenoptik says the Vector SR camera was developed to measure ‘spot speeds’ over a short section of road, such as those which are prone to collisions.

The solution uses the Vector2 integrated automatic number plate recognition (ANPR) camera platform, working alongside Jenoptik’s 3D tracking radar device, and can be mounted on a passively safe pole.

According to Jenoptik, the system can operate alongside the patented Vector IR Infra-Red illumination module, allowing image capture on a fully dark road without any distracting flashes or dazzling puddles of light.

Enforcement

For more information on companies in this article

Related Content

July 8, 2019

Jenoptik spot speed camera achieves UK gov approval

Jenoptik Traffic Solutions UK has announced its Vector SR camera has achieved UK Home Office Type Approval to operate as an unattended enforcement device for measurement of vehicle speeds. Jenoptik says the Vector SR camera was developed to measure ‘spot speeds’ over a short section of road, such as those which are prone to collisions. The solution uses the Vector2 integrated automatic number plate recognition camera platform, working alongside Jenoptik’s 3D tracking radar device, and can be mounted o
October 15, 2018

Jenoptik Vector P2P receives NMi approval

Jenoptik’s Vector P2P, an average speed point-to-point (P2P) enforcement system, can be used in the Netherlands following approval from the Dutch National Institute of Metrology (NMi). Vector P2P is based around the SPECS average speed measuring cameras used in the UK and will also be made available in other European and international jurisdictions which accept certification from the NMi. The system utilises the Vector2 camera platform to help it enable up to three lanes of image and automatic number
August 23, 2018

Jenoptik Vector P2P receives NMi approval in Netherlands

Jenoptik’s Vector P2P, an average speed point-to-point (P2P) enforcement system, can be used in the Netherlands following approval from the Dutch National Institute of Metrology (NMi). Vector P2P is based around the SPECS average speed measuring cameras used in the UK and will also be made available in other European and international jurisdictions which accept certification from the NMi. The system utilises the Vector2 camera platform to help it enable up to three lanes of image and automatic number
September 7, 2016

Jenoptik to present non-invasive enforcement systems

Jenoptik’s Traffic Solutions Division will use the ITS World Congress Melbourne to present a range of traffic enforcement systems which are active in Australia and around the world: the company aims to demonstrate how it is improving roads, journeys and communities with 30,000 cameras operational in over 80 countries and with 480 staff working on traffic solutions and more than 50 million plates read every day.
boombox1

Highlighted Content

boombox2