Redvision launches PoE-driven wiper option for Vega 2010 cameras

Redvision has released a wiper option for its Vega 2010 camera which it says removes dirt and water from the camera window. The PoE-driven wiper is concealed behind the front bezel of the camera when not in use. Stephen Lightfoot, technical director at Redvision explains: “Wiper power comes from the PoE-driven, CHAT interface board. This also provides camera, washer and built-in heater power to the Vega, along with audio communications. The Vega 2010 rugged housings are expected to allow installers to fit
October 29, 2018 Read time: 1 min
8785 Redvision has released a wiper option for its Vega 2010 camera which it says removes dirt and water from the camera window. The PoE-driven wiper is concealed behind the front bezel of the camera when not in use.


Stephen Lightfoot, technical director at Redvision explains: “Wiper power comes from the PoE-driven, CHAT interface board. This also provides camera, washer and built-in heater power to the Vega, along with audio communications.

The Vega 2010 rugged housings are expected to allow installers to fit their own camera and lens combinations, up to 290mm long.

“The Vega is made from tough, die-cast aluminium, which is both IP67 weather-proof and IK10 impact rated. It has an integrated junction box and all cabling is managed through its wall or pedestal mounting brackets,” Lightfoot adds.

Detection, Monitoring & Machine Vision

For more information on companies in this article

Related Content

February 13, 2018

Redvision launches Vega 2010 rugged housing range

UK-based Redvision has launched its rugged camera housing for tough, hazardous or corrosive, outdoor surveillance applications. It will house fixed camera and lens combinations and is said to provide protection from dirt, moisture and ingress. Called Redvision Vega 2010, the cable-managed device includes a Chat interface board for power, audio, washer and wiper control, using the Pelco telemetry protocol. Wiper and washer intervals can be automated using dip-switches on the Chat board when telemetry is no
March 16, 2018

Redvision adds two fixed camera options for Vega

Manufacturer of rugged CCTV products Redvision has added two pre-built, fixed-camera options to its Vega, rugged housing range. It includes the cable-managed Vega 2052, with a 2MP camera module and Vega 2054, which features a 4MP camera module. Both products are said to offer protection from dirt, moisture and dust ingress. The cable-manged devices come with terminals that aim to provide protection against vandalism. In addition, they can be installed with a pendent or pedestal mount for ceilings, walls
December 10, 2018

Redvision releases Vega 2052 bullet camera

Redvision has launched its outdoor Vega 2052 camera which it says is waterproof and resistant to vandalism. The company says the bullet camera does not require a junction box and is made from die-cast aluminium. It features a marine-grade plating as well as durable powder-coating. The camera’s cabling is routed through the housing and inside its walls or pedestal mounting brackets. Vega 2052 features a 2MP camera module with a Sony Exmor low light sensor.
April 19, 2018

Redvision launch combines thermal and IP, rugged PTZ camera

Redvision has launched a combined thermal and Internet Protocol (IP) rugged pan, tilt and zoom (PTZ) camera for tough, hazardous and corrosive outdoor environments. Called Volant Duo, the device comes with a dual-adaptive infra-red and white light Light-emitting diode illuminator option to provide lighting for its Starvis sensor up to 150m in darkness. Stephen Lightfoot, technical director at Redvision, said: “The Volant Duo offers both thermal and IP sensors in the same rugged, PTZ camera body. The
boombox1

Highlighted Content

boombox2